.

salt/pillars/network.sls

@@ -1,29 +1,34 @@
 network:
-  domain: suse.lan
   hostname: admin
-  netaddress: 192.168.0.0
+  domain: suse.lan
-  netmask: 24
+  interface: eth0 # to be bridged with wlan0 
-  ip: 192.168.0.1
+  wireless: wlan0 # not to be managed by NetworkManager
-  
+  bridge: br0 # hostapd will create this bridgeport
-  interface:
-    internal: eth0
-    bridge: br0
   external: eth1
-    wireless: wlan0
+  ip: 192.168.0.1 # all networks are /24
-
+  hosts: # key=hostname to be added to /etc/hosts, value=last octate of IP
+    rmt: 1
+    ntp: 1
+    dns: 1
+    www: 1
+    switch: 10
+    harvester: 20
+    node1: 21
+    node2: 22
+    node3: 23
   vlan:
     -
       id: 100
       address: 192.168.100.1
-      netmask: 24
+      zone: public
     -
       id: 200
       address: 192.168.200.1
-      netmask: 24
+      zone: public
     -
       id: 250
       address: 192.168.250.1
-      netmask: 24
+      zone: airgap
   wol:
     1: 7c:10:c9:50:17:9b
     2: 7c:10:c9:50:17:0a

salt/states/chrony/files/local.conf.jinja

@@ -1,2 +1,2 @@
 local stratum 10
-allow {{ pillar['network']['netaddress'] }}/{{ pillar['network']['netmask'] }}
+allow {{ pillar['network']['ip'][0:-1] }}0/24

salt/states/dnsmasq/files/tlu.conf.jinja

@@ -1,40 +1,40 @@
-bind-interfaces
+#bind-interfaces
-server=1.1.1.1
+#server=1.1.1.1
-server=1.0.0.1
+#server=1.0.0.1
 domain-needed
 bogus-priv
 #dhcp-range
-dhcp-range={{ pillar['network']['interface']['internal'] }},{{ pillar['network']['ip'][0:-1] }}50,{{ pillar['network']['ip'][0:-1] }}150,12h
+dhcp-range={{ pillar['network']['interface'] }},{{ pillar['network']['ip'][0:-1] }}50,{{ pillar['network']['ip'][0:-1] }}150,12h
-dhcp-range={{ pillar['network']['interface']['wireless'] }},{{ pillar['network']['ip'][0:-1] }}50,{{ pillar['network']['ip'][0:-1] }}150,12h
+dhcp-range={{ pillar['network']['wireless'] }},{{ pillar['network']['ip'][0:-1] }}50,{{ pillar['network']['ip'][0:-1] }}150,12h
 {% for vlan in pillar['network']['vlan'] -%}
-dhcp-range={{ pillar['network']['interface']['internal'] }}.{{ vlan['id'] }},{{ vlan['address'][0:-1] }}50,{{ vlan['address'][0:-1] }}150,12h
+dhcp-range={{ pillar['network']['interface'] }}.{{ vlan['id'] }},{{ vlan['address'][0:-1] }}50,{{ vlan['address'][0:-1] }}150,12h
 {% endfor %}
 #gateway
-dhcp-option={{ pillar['network']['interface']['internal'] }},3,{{ pillar['network']['ip'] }}
+dhcp-option={{ pillar['network']['interface'] }},3,{{ pillar['network']['ip'] }}
-dhcp-option={{ pillar['network']['interface']['wireless'] }},3,{{ pillar['network']['ip'] }}
+dhcp-option={{ pillar['network']['wireless'] }},3,{{ pillar['network']['ip'] }}
 {% for vlan in pillar['network']['vlan'] -%}
-dhcp-option={{ pillar['network']['interface']['internal'] }}.{{ vlan['id'] }},3,{{ vlan['address'] }}
+dhcp-option={{ pillar['network']['interface'] }}.{{ vlan['id'] }},3,{{ vlan['address'] }}
 {% endfor %}
 
 # dns-server
-dhcp-option={{ pillar['network']['interface']['internal'] }},6,{{ pillar['network']['ip'] }}
+dhcp-option={{ pillar['network']['interface'] }},6,{{ pillar['network']['ip'] }}
-dhcp-option={{ pillar['network']['interface']['wireless'] }},6,{{ pillar['network']['ip'] }}
+dhcp-option={{ pillar['network']['wireless'] }},6,{{ pillar['network']['ip'] }}
 {% for vlan in pillar['network']['vlan'] -%}
-dhcp-option={{ pillar['network']['interface']['internal'] }}.{{ vlan['id'] }},6,{{ vlan['address'] }}
+dhcp-option={{ pillar['network']['interface'] }}.{{ vlan['id'] }},6,{{ vlan['address'] }}
 {% endfor %}
 
 #ntp
-dhcp-option={{ pillar['network']['interface']['internal'] }},option:ntp-server,{{ pillar['network']['ip'] }}
+dhcp-option={{ pillar['network']['interface'] }},option:ntp-server,{{ pillar['network']['ip'] }}
-dhcp-option={{ pillar['network']['interface']['wireless'] }},option:ntp-server,{{ pillar['network']['ip'] }}
+dhcp-option={{ pillar['network']['wireless'] }},option:ntp-server,{{ pillar['network']['ip'] }}
 {% for vlan in pillar['network']['vlan'] -%}
-dhcp-option={{ pillar['network']['interface']['internal'] }}.{{ vlan['id'] }},option:ntp-server,{{ vlan['address'] }}
+dhcp-option={{ pillar['network']['interface'] }}.{{ vlan['id'] }},option:ntp-server,{{ vlan['address'] }}
 {% endfor %}
 
 #PXE
-dhcp-option={{ pillar['network']['interface']['internal'] }},66,{{ pillar['network']['ip'] }}
+dhcp-option={{ pillar['network']['interface'] }},66,{{ pillar['network']['ip'] }}
-dhcp-option={{ pillar['network']['interface']['wireless'] }},66,{{ pillar['network']['ip'] }}
+dhcp-option={{ pillar['network']['wireless'] }},66,{{ pillar['network']['ip'] }}
 {% for vlan in pillar['network']['vlan'] -%}
-dhcp-option={{ pillar['network']['interface']['internal'] }}.{{ vlan['id'] }},66,{{ vlan['address'] }}
+dhcp-option={{ pillar['network']['interface'] }}.{{ vlan['id'] }},66,{{ vlan['address'] }}
 {% endfor %}
 enable-tftp
 tftp-root=/srv/tftpboot

salt/states/firewalld/init.sls

@@ -13,7 +13,7 @@ Configure firewalld for external interface:
     - prune_interfaces: True
     - prune_sources: True
     - interfaces:
-      - {{ pillar['network']['interface']['external'] }}
+      - {{ pillar['network']['external'] }}
     - services:
       - ssh
       - wireguard
@@ -26,12 +26,12 @@ Configure firewalld for internal network:
     - prune_interfaces: True
     - prune_sources: True
     - interfaces:
-      - {{ pillar['network']['interface']['internal'] }}
+      - {{ pillar['network']['interface'] }}
       - {{ pillar['wireguard']['iface'] }}
-      - {{ pillar['network']['interface']['wireless'] }}
+      - {{ pillar['network']['wireless'] }}
-      - {{ pillar['network']['interface']['bridge'] }}
+      - {{ pillar['network']['bridge'] }}
     - sources:
-      - {{ pillar['network']['netaddress'] }}/{{ pillar['network']['netmask'] }}
+      - {{ pillar['network']['ip'][0:-1] }}0/24
     - services:
       - ssh
       - dhcp
@@ -41,7 +41,7 @@ Configure firewalld for internal network:
       - dns
       - ntp
 
-Configure firewalld for vlan networks:
+Configure firewalld for public networks:
   firewalld.present:
     - name: public
     - prune_ports: True
@@ -50,13 +50,46 @@ Configure firewalld for vlan networks:
     - prune_sources: True
     - interfaces:
       {% for vlan in pillar['network']['vlan'] -%}
+      {% if vlan['zone'] == 'public' -%}
       - vlan.{{ vlan['id'] }}
+      {% endif -%}
       {% endfor %}
     - sources:
       {% for vlan in pillar['network']['vlan'] -%}
       {% set ip = vlan['address'] -%}
-      {% set netmask = vlan['netmask'] -%}
+      {% if vlan['zone'] == 'public' -%}
-      - {{ ip[0:-1] }}0/{{ netmask }}
+      - {{ ip[0:-1] }}0/24
+      {% endif -%}
+      {% endfor %}
+    - services:
+      - ssh
+      - dhcp
+      - tftp
+      - http
+      - https
+      - dns
+      - ntp
+
+
+Configure firewalld for airgap networks:
+  firewalld.present:
+    - name: airgap
+    - prune_ports: True
+    - prune_services: True
+    - prune_interfaces: True
+    - prune_sources: True
+    - interfaces:
+      {% for vlan in pillar['network']['vlan'] -%}
+      {% if vlan['zone'] == 'airgap' -%}
+      - vlan.{{ vlan['id'] }}
+      {% endif -%}
+      {% endfor %}
+    - sources:
+      {% for vlan in pillar['network']['vlan'] -%}
+      {% set ip = vlan['address'] -%}
+      {% if vlan['zone'] == 'airgap' -%}
+      - {{ ip[0:-1] }}0/24
+      {% endif -%}
       {% endfor %}
     - services:
       - ssh

salt/states/hostapd/files/hostapd.conf.jinja

@@ -1,6 +1,6 @@
 country_code={{ pillar['hostapd']['country_code'] }}
-interface={{ pillar['network']['interface']['wireless'] }}
+interface={{ pillar['network']['wireless'] }}
-bridge={{ pillar['network']['interface']['bridge'] }}
+bridge={{ pillar['network']['bridge'] }}
 ssid={{ pillar['hostapd']['ssid'] }}
 hw_mode=g
 channel={{ pillar['hostapd']['channel'] }}

salt/states/hostapd/init.sls

@@ -1,12 +1,12 @@
-Set {{ pillar['network']['interface']['wireless'] }} to not be managed by NetworkManager:
+Set {{ pillar['network']['wireless'] }} to not be managed by NetworkManager:
   cmd.run:
-    - name: nmcli device set {{ pillar['network']['interface']['wireless'] }} managed no
+    - name: nmcli device set {{ pillar['network']['wireless'] }} managed no
-    - unless: bash -c "if [[ \"$(nmcli device show {{ pillar['network']['interface']['wireless'] }} | sed -n 's/^GENERAL.STATE.*(\(.*\)).*$/\1/p')\" == \"unmanaged\" ]]; then exit 0; else exit 1; fi"
+    - unless: bash -c "if [[ \"$(nmcli device show {{ pillar['network']['wireless'] }} | sed -n 's/^GENERAL.STATE.*(\(.*\)).*$/\1/p')\" == \"unmanaged\" ]]; then exit 0; else exit 1; fi"
 
-Delete {{ pillar['network']['interface']['internal'] }} connection:
+Delete {{ pillar['network']['interface'] }} connection:
   cmd.run:
-    - name: nmcli connection delete {{ pillar['network']['interface']['internal'] }}
+    - name: nmcli connection delete {{ pillar['network']['interface'] }}
-    - unless: nmcli connection show {{ pillar['network']['interface']['internal'] }} > /dev/null
+    - unless: nmcli connection show {{ pillar['network']['interface'] }} > /dev/null
 
 Install hostapd:
   pkg.installed:
@@ -28,19 +28,19 @@ Start hostapd:
     - watch:
       - file: Configure hostapd
 
-Set {{ pillar['network']['interface']['bridge'] }} to be managed by NetworkManager:
+Set {{ pillar['network']['bridge'] }} to be managed by NetworkManager:
   cmd.run:
-    - name: nmcli device set {{ pillar['network']['interface']['bridge'] }} managed yes
+    - name: nmcli device set {{ pillar['network']['bridge'] }} managed yes
-    - unless: bash -c "if [[ \"$(nmcli device show {{ pillar['network']['interface']['bridge'] }} | sed -n 's/^GENERAL.STATE.*(\(.*\)).*$/\1/p')\" == \"unmanaged\" ]]; then exit 1; else exit 0; fi"
+    - unless: bash -c "if [[ \"$(nmcli device show {{ pillar['network']['bridge'] }} | sed -n 's/^GENERAL.STATE.*(\(.*\)).*$/\1/p')\" == \"unmanaged\" ]]; then exit 1; else exit 0; fi"
 
-Configure {{ pillar['network']['interface']['bridge'] }} connection:
+Configure {{ pillar['network']['bridge'] }} connection:
   cmd.run:
-    - name: nmcli connection add con-name {{ pillar['network']['interface']['bridge'] }} type bridge ifname {{ pillar['network']['interface']['bridge'] }} ipv4.method manual ipv4.addresses {{ pillar['network']['ip'] }}/{{ pillar['network']['netmask'] }}   ipv4.dns "127.0.0.1, 1.1.1.1, 1.1.1.2" ipv6.method disabled connection.autoconnect yes stp no
+    - name: nmcli connection add con-name {{ pillar['network']['bridge'] }} type bridge ifname {{ pillar['network']['bridge'] }} ipv4.method manual ipv4.addresses {{ pillar['network']['ip'] }}/24 ipv4.dns "127.0.0.1, 1.1.1.1, 1.1.1.2" ipv6.method disabled connection.autoconnect yes stp no
-    - unless: nmcli connection show {{ pillar['network']['interface']['bridge'] }} > /dev/null
+    - unless: nmcli connection show {{ pillar['network']['bridge'] }} > /dev/null
 
-Add {{ pillar['network']['interface']['internal'] }} to bridge {{ pillar['network']['interface']['bridge'] }}:
+Add {{ pillar['network']['interface'] }} to bridge {{ pillar['network']['bridge'] }}:
   cmd.run:
-    - name: nmcli connection add con-name {{ pillar['network']['interface']['bridge'] }}-{{ pillar['network']['interface']['internal'] }} ifname {{ pillar['network']['interface']['internal'] }} type bridge-slave master {{ pillar['network']['interface']['bridge'] }} connection.autoconnect yes
+    - name: nmcli connection add con-name {{ pillar['network']['bridge'] }}-{{ pillar['network']['interface'] }} ifname {{ pillar['network']['interface'] }} type bridge-slave master {{ pillar['network']['bridge'] }} connection.autoconnect yes
-    - unless: nmcli connection show {{ pillar['network']['interface']['bridge'] }}-{{ pillar['network']['interface']['internal'] }} > /dev/null
+    - unless: nmcli connection show {{ pillar['network']['bridge'] }}-{{ pillar['network']['interface'] }} > /dev/null
 
 

salt/states/hosts/files/hosts.jinja

@@ -24,7 +24,6 @@ ff02::1         ipv6-allnodes
 ff02::2         ipv6-allrouters
 ff02::3         ipv6-allhosts
 
-{% for svc in ['rmt', 'www'] -%}
+{% for host, ip in pillar['network']['hosts'].items() -%}
-{{ ip }}	{{ svc }}.{{ domain }}	{{ svc }}
+{{ pillar['network']['ip'][0:-1] }}{{ ip }}	{{ host }}.{{ domain }}	{{ host }}
 {% endfor %}
-{{ pillar['network']['ip'][0:-1] }}20	harvester.{{ domain }}	harvester

salt/states/hosts/init.sls

@@ -1,7 +1,7 @@
 Configure hosts file:
   file.managed:
     - name: /etc/hosts
-    - source: salt://hostname/files/hosts.jinja
+    - source: salt://hosts/files/hosts.jinja
     - template: jinja
     - user: root
     - group: root
@@ -10,7 +10,7 @@ Configure hosts file:
 Configure hostname file:
   file.managed:
     - name: /etc/hostname
-    - source: salt://hostname/files/hostname.jinja
+    - source: salt://hosts/files/hostname.jinja
     - template: jinja
     - user: root
     - group: root

salt/states/rmt/init.sls

@@ -61,7 +61,7 @@ Set fqdn for rmt http:
 Restart nginx:
   service.running:
     - name: nginx
-    - enable: Trie
+    - enable: True
     - watch:
       - file: Remove rmt http as default site
       - file: Set fqdn for rmt https

salt/states/top.sls

@@ -1,6 +1,6 @@
 base:
   '*':
-    - hostname
+    - hosts
     - ssh
     - chrony
     - atftp

salt/states/wireguard/files/interface.conf.template

@@ -2,8 +2,8 @@
 Address = {{ pillar['wireguard']['address'] }}
 PrivateKey = {{ pillar['wireguard']['privatekey'] }}
 ListenPort = {{ pillar['wireguard']['port'] }}
-PostUp = iptables -A FORWARD -i {{ pillar['wireguard']['iface'] }} -j ACCEPT; iptables -t nat -A POSTROUTING -o {{ pillar['network']['interface']['internal'] }} -j MASQUERADE
+PostUp = iptables -A FORWARD -i {{ pillar['wireguard']['iface'] }} -j ACCEPT; iptables -t nat -A POSTROUTING -o {{ pillar['network']['interface'] }} -j MASQUERADE
-PostDOWN = iptables -D FORWARD -i {{ pillar['wireguard']['iface'] }} -j ACCEPT; iptables -t nat -D POSTROUTING -o {{ pillar['network']['interface']['internal'] }} -j MASQUERADE
+PostDOWN = iptables -D FORWARD -i {{ pillar['wireguard']['iface'] }} -j ACCEPT; iptables -t nat -D POSTROUTING -o {{ pillar['network']['interface'] }} -j MASQUERADE
 
 {% for peer in pillar['wireguard']['peers'] -%}
 [peer]

salt/states/wol/files/wol.jinja

@@ -7,7 +7,7 @@ do
     case "$arg" in
 {% for number, mac in pillar['network']['wol'].items() %}
       {{ number }}|srv{{ number }}|server{{ number }})
-           sudo ether-wake -i {{ pillar['network']['interface']['bridge'] }} {{ mac }} 
+           sudo ether-wake -i {{ pillar['network']['bridge'] }} {{ mac }} 
            ;;
 {% endfor %}