## Type: integer ## Default: "" # # How log to wait for IPv6 autoconfig in ifup when requested with # the auto6 or +auto6 tag in BOOTPROTO variable. # When unset, a wicked built-in default defer time (10sec) is used. # AUTO6_WAIT_AT_BOOT="" ## Type: list(all,dns,none,"") ## Default: "" # # Whether to update system (DNS) settings from IPv6 RA when requested # with the auto6 or +auto6 tag in BOOTPROTO variable. # Defaults to update if autoconf sysctl (address autoconf) is enabled. # AUTO6_UPDATE="" ## Type: list(auto,yes,no) ## Default: "auto" # # Permits to specify/modify a global ifcfg default. Use with care! # # This settings breaks rules for many things, which require carrier # before they can start, e.g. L2 link protocols, link authentication, # ipv4 duplicate address detection, ipv6 duplicate detection will # happen "post-mortem" and maybe even cause to disable ipv6 at all. # See also "man ifcfg" for further informations. # LINK_REQUIRED="auto" ## Type: string ## Default: "" # # Allows to specify a comma separated list of debug facilities used # by wicked. Negated facility names can be prepended by a "-", e.g.: # "all,-events,-socket,-objectmodel,xpath,xml,dbus" # # When set, wicked debug level is automatically enabled. # For a complete list of facility names, see: "wicked --debug help". # WICKED_DEBUG="" ## Type: list("",error,warning,notice,info,debug,debug1,debug2,debug3) ## Default: "" # # Allows to specify wicked debug level. Default level is "notice". # WICKED_LOG_LEVEL="" ## Path: Network/General ## Description: Global network configuration # # Note: # Most of the options can and should be overridden by per-interface # settings in the ifcfg-* files. # # Note: The ISC dhclient started by the NetworkManager is not using any # of these options -- NetworkManager is not using any sysconfig settings. # ## Type: yesno ## Default: yes # If ifup should check if an IPv4 address is already in use, set this to yes. # # Make sure that packet sockets (CONFIG_PACKET) are supported in the kernel, # since this feature uses arp, which depends on that. # Also be aware that this takes one second per interface; consider that when # setting up a lot of interfaces. CHECK_DUPLICATE_IP="yes" ## Type: list(auto,yes,no) ## Default: auto # If ifup should send a gratuitous ARP to inform the receivers about its # IPv4 addresses. Default is to send gratuitous ARP, when duplicate IPv4 # address check is enabled and the check were sucessful. # # Make sure that packet sockets (CONFIG_PACKET) are supported in the kernel, # since this feature uses arp, which depends on that. SEND_GRATUITOUS_ARP="auto" ## Type: yesno ## Default: no # Switch on/off debug messages for all network configuration stuff. If set to no # most scripts can enable it locally with "-o debug". DEBUG="no" ## Type: integer ## Default: 30 # # Some interfaces need some time to come up or come asynchronously via hotplug. # WAIT_FOR_INTERFACES is a global wait for all mandatory interfaces in # seconds. If empty no wait occurs. # WAIT_FOR_INTERFACES="30" ## Type: yesno ## Default: yes # # With this variable you can determine if the SuSEfirewall when enabled # should get started when network interfaces are started. FIREWALL="yes" ## Type: int ## Default: 30 # # When using NetworkManager you may define a timeout to wait for NetworkManager # to connect in NetworkManager-wait-online.service. Other network services # may require the system to have a valid network setup in order to succeed. # # This variable has no effect if NetworkManager is disabled. # NM_ONLINE_TIMEOUT="30" ## Type: string ## Default: "dns-resolver dns-bind ntp-runtime nis" # # This variable defines the start order of netconfig modules installed # in the /etc/netconfig.d/ directory. # # To disable the execution of a module, don't remove it from the list # but prepend it with a minus sign, "-ntp-runtime". # NETCONFIG_MODULES_ORDER="dns-resolver dns-bind dns-dnsmasq nis ntp-runtime" ## Type: yesno ## Default: no # # Enable netconfig verbose reporting. # NETCONFIG_VERBOSE="no" ## Type: yesno ## Default: no # # This variable enables netconfig to always force a replace of modified # files and automatically enables the -f | --force-replace parameter. # # The purpose is to use it as workaround, when some other tool trashes # the files, e.g. /etc/resolv.conf and you observe messages like this # in your logs on in "netconfig update" output: # ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched. # # Please do not forget to also report a bug as we have a system policy # to use netconfig. # NETCONFIG_FORCE_REPLACE="no" ## Type: string ## Default: "auto" # # Defines the DNS merge policy as documented in netconfig(8) manual page. # Set to "" to disable DNS configuration. # NETCONFIG_DNS_POLICY="auto" ## Type: string(resolver,bind,dnsmasq,) ## Default: "resolver" # # Defines the name of the DNS forwarder that has to be configured. # Currently implemented are "bind", "dnsmasq" and "resolver", that # causes to write the name server IP addresses to /etc/resolv.conf # only (no forwarder). Empty string defaults to "resolver". # NETCONFIG_DNS_FORWARDER="resolver" ## Type: yesno ## Default: yes # # When enabled (default) in forwarder mode ("bind", "dnsmasq"), # netconfig writes an explicit localhost nameserver address to the # /etc/resolv.conf, followed by the policy resolved name server list # as fallback for the moments, when the local forwarder is stopped. # NETCONFIG_DNS_FORWARDER_FALLBACK="yes" ## Type: string ## Default: "" # # List of DNS domain names used for host-name lookup. # It is written as search list into the /etc/resolv.conf file. # NETCONFIG_DNS_STATIC_SEARCHLIST="" ## Type: string ## Default: "" # # List of DNS nameserver IP addresses to use for host-name lookup. # When the NETCONFIG_DNS_FORWARDER variable is set to "resolver", # the name servers are written directly to /etc/resolv.conf. # Otherwise, the nameserver are written into a forwarder specific # configuration file and the /etc/resolv.conf does not contain any # nameservers causing the glibc to use the name server on the local # machine (the forwarder). See also netconfig(8) manual page # NETCONFIG_DNS_STATIC_SERVERS="10.2.0.101 10.2.0.102" ## Type: string ## Default: "auto" # # Allows to specify a custom DNS service ranking list, that is which # services provide preferred (e.g. vpn services), and which services # fallback settings (e.g. avahi). # Preferred service names have to be prepended with a "+", fallback # service names with a "-" character. The special default value # "auto" enables the current build-in service ranking list -- see the # netconfig(8) manual page -- "none" or "" disables the ranking. # NETCONFIG_DNS_RANKING="auto" ## Type: string ## Default: "" # # Allows to specify options to use when writting the /etc/resolv.conf, # for example: # "debug attempts:1 timeout:10" # See resolv.conf(5) manual page for details. # NETCONFIG_DNS_RESOLVER_OPTIONS="" ## Type: string ## Default: "" # # Allows to specify a sortlist to use when writting the /etc/resolv.conf, # for example: # 130.155.160.0/255.255.240.0 130.155.0.0" # See resolv.conf(5) manual page for details. # NETCONFIG_DNS_RESOLVER_SORTLIST="" ## Type: string ## Default: "auto" # # Defines the NTP merge policy as documented in netconfig(8) manual page. # Set to "" to disable NTP configuration. # NETCONFIG_NTP_POLICY="auto" ## Type: string ## Default: "" # # List of NTP servers. # NETCONFIG_NTP_STATIC_SERVERS="" ## Type: string ## Default: "auto" # # Defines the NIS merge policy as documented in netconfig(8) manual page. # Set to "" to disable NIS configuration. # NETCONFIG_NIS_POLICY="auto" ## Type: string(yes,no,) ## Default: "yes" # # Defines whether to set the default NIS domain. When enabled and no domain # is provided dynamically or in static settings, /etc/defaultdomain is used. # Valid values are: # - "no" or "" netconfig does not set the domainname # - "yes" netconfig sets the domainname according to the # NIS policy using settings provided by the first # iterface and service that provided it. # - "" as yes, but only using settings from interface. # NETCONFIG_NIS_SETDOMAINNAME="yes" ## Type: string ## Default: "" # # Defines a default NIS domain. # # Further domain can be specified by adding a "_" suffix to # the NETCONFIG_NIS_STATIC_DOMAIN and NETCONFIG_NIS_STATIC_SERVERS # variables, e.g.: NETCONFIG_NIS_STATIC_DOMAIN_1="second". # NETCONFIG_NIS_STATIC_DOMAIN="" ## Type: string ## Default: "" # # Defines a list of NIS servers for the default NIS domain or the # domain specified with same "_" suffix. # NETCONFIG_NIS_STATIC_SERVERS="" ## Type: string ## Default: '' # # Set this variable global variable to the ISO / IEC 3166 alpha2 # country code specifying the wireless regulatory domain to set. # When not empty, ifup-wireless will be set in the wpa_supplicant # config or via 'iw reg set' command. # # Note: This option requires a wpa driver supporting it, like # the 'nl80211' driver used by default since openSUSE 11.3. # When you notice problems with your hardware, please file a # bug report and set e.g. WIRELESS_WPA_DRIVER='wext' (the old # default driver) in the ifcfg file. # See also "/usr/sbin/wpa_supplicant --help" for the list of # available wpa drivers. # WIRELESS_REGULATORY_DOMAIN=''